Actualización del sitio web de VICAST

Grooved couplings connect prepared pipe ends using a mechanical link instead of welding. A standard joint features grooved pipe ends, a rubber gasket, a ductile-iron housing, and fastening bolts. VICAST’s XGQT02 flexible grooved coupling comes in sizes ranging from 1 to 12 inches (DN25 to DN300). It has an operating

Fire protection pipe networks frequently require joining grooved-end piping to flanged gear. This equipment includes valves, pumps, meters, and similar parts. A grooved flange acts as a bridge between these two connection styles. At the same time, it keeps the whole setup compatible with a grooved design. Engineers, contractors, distributors,

Choosing the correct hole saw size is critical when installing a U-Bolt Mechanical Tee. The opening must allow the outlet neck to seat correctly without exceeding the diameter permitted by the manufacturer. A hole that is too small can prevent proper positioning, while an oversized, rough, or off-center hole can

A mechanical tee allows installers to create a branch connection on a run pipe without cutting the main line into separate sections. However, a reliable installation depends on one critical step: cutting the correct hole. A common mistake is to assume that a 1-inch threaded outlet needs a 1-inch hole